Owner's manual

if the Start/Pause field was not
touched in the time of 5 minutes.
after 5 minutes from the programme
end.
Push the
On/Off
button to turn on the
appliance.
If the appliance is on, some indications
come in to the view on the display.
9.5 Setting a programme
Use the programme dial to set the
programme.
The possible time to complete the
programme comes into the view on the
display.
The drying time you see is
related to the load of 5 kg
for cotton and jeans
programmes. For the other
programmes the drying time
is related to the
recommended loads. The
drying time of the cotton
and jeans programmes with
the load more than 5 kg is
longer.
9.6 Options
Together with the programme you can
set 1 or more special options.
S e n s i D r y
Memory 1
Memory 2
Extra Silent
Start/Pause
Delay
Start
Time Dry
Buzzer
Spun at
RPM
Dry Plus
Anti-
crease
To activate or deactivate the option
touch the applicable option field.
When the option is activated the LED
above the option field or symbol on the
display comes into the view.
9.7 Child lock option
The child lock can be set to prevent the
children to play with the appliance. The
child lock option locks all push buttons
and the programme dial (this option
does not lock On/Off button).
You can activate the child lock option:
before you push the Start/Pause
button - the appliance cannot start
after you push the Start/Pause button
- programmes and option selection is
off.
Child lock option activation:
1. Turn on the dryer.
2. Wait approximately 8 seconds.
3. Select 1 of the available
programmes.
4. Touch at the same time and hold
down the Dry Plus and Anti-crease
option fields.
S e n s i D r y
Memory 1
Memory 2
Extra Silent
Start/Pause
Delay
Start
Time Dry
Buzzer
Spun at
RPM
Dry Plus
Anti-
crease
The symbol comes into the view on
the display.
5. To deactivate the child lock, touch
again the above option fields until
the symbol goes out of the view.
9.8 Memory - user
configuration
You can save your own programme
configuration in the appliance memory
under 2 positions:
Memory 1 / Memory 2
To save your own configuration:
1. Select the programme and options.
2. Touch the Memory 1 or Memory 2
field for few seconds.
ENGLISH
17