Owner's manual

2. Move the plastic connection out and
drain the water into a basin or
equivalent receptacle.
3. Move plastic connection in and install
water container.
4. To continue the programme press
the Start/Pause button.
11.3 Cleaning the heat
exchanger
If the symbol Condenser flashes on
the display, do the inspection of the heat
exchanger and its compartment. If there
is a dirt, clean it.
To do the inspection:
1. Open the door. Pull the filter.
2. Move the release button on the
bottom of the door to open the heat
exchanger door.
3. Turn the blockage to unlock the heat
exchanger cover.
4. Lower the heat exchanger cover.
5. If necessary clean the small water
filter from the bottom of the
compartment. Put the small water
filter back.
ENGLISH
21