User manual
10 www.aeg.com
TROUBLESHOOTING
SYMPTOM CAUSE SOLUTION
The blender does not
switch on.
Jug/base are not xed properly. Check if all the components are in correct
position. Note! the jug can only be placed
on the base with handle towards the user
interface.
The ON/OFF-button is not pressed. Make sure the display is illuminated. If not,
press the Power button to turn the blender on.
The motor has overheated. The display is
blinking.
Wait until the product has cooled down and all
the buttons are lit.
The plug is not properly connected to the
power outlet.
Check the connection of the plug to the outlet
or try another outlet.
Power outage. Wait until power outage is over.
Functional problem. Contact authorized service.
The motor stalls
during operation
If the motor stalls, turn the blender o
immediately, unplug the appliance and let it
cool for at least 10 minutes.
Ingredients are too large. Cut all rm fruits and vegetables into pieces no
larger than 1.8 cm² to 2.5 cm².
Wrong ingredients. The appliance intended use is production of
beverages. Add fruits, vegetables or similiar.
Never mix ingredients such as dough, mashed
potatoes, meat or similar.
DISPOSAL
This symbol on the product indicates that this product contains a battery which shall not be disposed with
normal household waste.
This symbol on the product or on its packaging indicates that the product may not be treated as household
waste. To recycle your product, please take it to an oicial collection point or to an AEG service center that can
remove and recycle the battery and electric parts in a safe and professional way. Follow your country’s rules for
the separate collection of electrical products and rechargeable batteries.
AEG reserves the right to change products, information and specications without notice.