Operating instructions

41
➜
12. Accessories and options
Order no. 8000 006 757 Support for 35 mm snap-on assembly
for 8A,16A and 30A
Order no. 2000 000 841 Busmodul Profibus DP
Order no. 2000 000 842 Busmodul Modbus RTU
➜
13. Approvals and conformities
The following approvals and conformities are available for Thyro-A
• Quality standard according to DIN EN ISO 9001
• UL registration, file no. E 135074, under preparation, with consideration to
Canadian National Standard, project no. 02ME08043
• CE conformity
• Low voltage directive 73/23 EEC
• EMV directive 89/336 EEC; 92/31 EEC
• Marking directive 93/68 EEC
There is no product norm for Thyristor Power Controllers so that a sensible norm
structure must be set up which ensures safe application and opportunity for com-
parison.
CAUTION
Thyristor Power Controllers are not devices for disconnection in the
sense of DIN VDE 0105 T1 and may therefore be operated only in
connection with a suitable mains isolating device (e.g. switch, isolating
link).
Further norms are adhered to, e.g. voltage dips according to 61000-4-11:8.94 are
ignored by the control device or registered by triggering off monitoring. Generally
an automatic start is made after the mains returns within the tolerances.
In detail
Conditions for use
Built-in unit (VDE 0160) DIN EN 50 178
General requirements DIN EN 60146-1-1:12.97
Design, vertical installation
Operating conditions DIN EN 60 146-1-1; K. 2.5
Operating location, industry sector CISPR 6