Manual

PREWASH

INTENSIVE

START/PAUSE

■ Prewash

A programme with prewash may be selected for heavily soiled

items.

Result:

A prewaéh cycle at a maximum temperature of 40°C is performed

before washing.

The prewash function cannot be used with the wool programme

or when the QUICK WASH button is depressed.

■ Intensive

The intensive option may be selected with all programmes except

ECONOMY, WOOL. DELICATES and when the QUICK WASH

button is depressed. It allows thorough washing of heavily soiled

laundry. The wash cycle time is extended by 10 minutes.

■ Start/Pause

After the machine has been switched on, the pilot light over this

button starts to flash.

When the button is pressed, the programme starts and the pilot

light goes out.

To interrupt the programme or to open the porthole door in the

middle of a programme, press this button again. The pilot light will

start to flash.

The door can only be opened after about 2 minutes.

When the button is pressed again, the programme resumes and

the light goes out.

Important: The door can only be opened if the water level is

lower than the bottom of the porthole. Otherwise, the water must

first be pumped out.

The START/PAUSE button can also be used to pump out the

water after the SOAK programme and after a RINSE HOLD pro

gramme: the soaking water is only pumped out, whilst in the other

programmes the machine will perform a short spin.