Manual

Installation instructions
All transit devices must be removed before installing and
connecting the appliance.
Proceed as follows:
Using a spanner, remove the bolt on the right at the back of the
machine.
Gentiy iay the machine on its back, taking care not to squash the
hoses.
This can be done more easiiy by placing one of the corner pack
ing pieces between the machine and the floor.
Remove the polystyrene packing piece.
Peel off the adhesive strip and carefully remove the right-hand
polythene bag (1), then the left-hand bag (2) by pulling both
towards the centre of the machine.
Removing the
transit devices