User manual

- 67 -
Other Features
Displaying TV Information: Programme Number,
Programme Name, Sound Indicator, time, teletext,
channel type and signal information is displayed on the
screen when a new programme is entered or “INFO”
button is pressed.
Mute Function: Press “
” button to disable sound.
Mute indicator will be displayed in the upper side of
the screen. To cancel mute, there are two alternatives;
the  rst one is pressing the “
” button and the second
one is increasing the volume level.
Picture Mode Selection: By pressing PRESETS
button, you can change Picture Mode settings in
accordance with your viewing requirements. Available
options are Dynamic, Natural, Game and Cinema.
Displaying Subtitles: You can enable subtitles by
pressing the SUBTITLE button of the remote control.
Press SUBTITLE button again to disable subtitle
function.
If “Subtitle” is On, pressing the “
” button causes
the following warning message display on the screen
(** for UK only).
Teletext for analogue TV
The teletext system transmits information such as
news, sports and weather on your TV. Note as the
signal degrades, for example in poor/adverse weather
conditions, some text errors may occur or the teletext
mode may be aborted.
Teletext function buttons are listed below:
“
” Teletext: Activates teletext mode when pressed
once. Press again to place the teletext screen over
the programme (mix).Pressing again will quit the
teletext mode.
“RETURN” Index: Selects the teletext index page.
“INFO”Reveal: Shows hidden information (e.g.
solutions of games).
“OK” Hold: Holds a text page when convenient. Press
again to resume.
“
”/“ ” Subcode Pages: Selects subcode pages
if available as indicated by an arrow next to the page
number.
P+ or P- and numbers (0-9): Press to select a page.
Note: Most TV stations use page 100 for their index
pages.
Coloured Buttons (RED/GREEN/YELLOW/
BLUE)
Your TV supports both FASTEXT and TOP text
systems. When these systems are available, the
pages are divided into groups or topics. When
FASTEXT is available,coloured text at the foot of
the page shows which subject will be displayed by
pressing the corresponding coloured button.
The coloured writings will appear, showing you which
coloured buttons to use when TOP text transmission
is present. Pressing “
” or “ ” commands will request
the next or previous page respec tively.
Teletext for Digital TV
The appearance and behaviour of digital TV teletext
is different to analogue TV but it is easily operated by
following on-screen prompts.
“
” Teletext / Mix :Press once and the TV will
display teletext if it is available on the current TV
channel. Press again to quit teletext.
“
” / “ ” Highlight subject and press OK to view it.
Number buttons (0-9): Press to key in a page number
and it will appear on-screen.
Coloured buttons (RED, GREEN, YELLOW, BLUE):
Press to view the corresponding subject labelled
on-screen.
Tips
Screen Care: Only use cleaners approved for LCD
screens.
Do not use abrasive solvents as they may damage the
coating layer of the TV screen. For your safety, unplug
the mains plug when cleaning the set. When moving
the TV, hold it properly by the bottom part.
Image Persistence: Please note that ghosting may
occur while displaying a static image.LCD TVs’ image
persistence may disappear after a short time. Try
turning off the TV for a while.
To avoid this, do not leave the screen displaying a
static image for extended periods.
02_MB62_[GB]_(01-TV)_IDTV_BRONZE19_1900UK_19742W_10074722.indd 67 16.08.2011 16:33:49