Technical information

Practical A.E.G Upgrade 2006

What cause the strange noise from the motor and/or the motor gear?

Most AEGs have their motors being held inside the hand grip. Instead of affixing

the motor with screws, the typical approach is to use a motor plate to get the

motor in the appropriate position. Since the hand grip has very limited space,

sometimes it can be very tough to accommodate the motor and also the two

wires (one red wire and one black wire).

When installing the motor plate, make sure that none of the wires gets in the

way, otherwise the motor will not be correctly positioned and will generate very

strange noise when firing.