Technical information

Practical A.E.G Upgrade 2006

The stock Cybergun Springer lower receiver:

Note: If you are using Cybergun V2 mechbox, since there is a spring release lever at the back, we

need to accordingly make room in the lower receiver for accommodating it:

The original piston assembly on the upper half of the receiver has to be removed

(keep only the hopup unit and the barrel and almost nothing else). Plug in a

Select Fire safety switch unit, a M4 pistol grip, a long type AEG motor and a

motor cover plate and you can go semi/full auto almost immediately.

For this demo project the following third party components were used:

The CA motor cover plate, the CA M15 safety switch, and the ICS 2000 motor