User manual

Connecting the suction tubes

Join the two tubes.

Adjust the Telescopic Tube (depending on model)

Attaching the suction hose

Insert the suction hose connector in the suction inlet.

It locks in place and can be rotated all the way

around.

Press the release button and pull out the connector in

order to remove the suction hose.

Mains connection/Cable rewind

The mains cable is in the cable compartment.

Pull out the cable and insert the plug into the mains

socket. Remove plug from the mains

socket. Press the foot button; the cable rewinds

automatically when vacuuming has been completed.

Using the nozzles

Using the floor nozzle*

For the daily care of carpets and hard floors.

Without being changed over manually, the floor

nozzle is entirely suited for daily vacuuming of carpets

and hard floor surfaces such as parquet, tiles,

linoleum, etc.

Using the floor nozzle*

For the daily care of carpets and hard floors. The

floor nozzle may be changed over manually. The

brushes can be extended for smooth floors and

retracted for carpets.

Crevice and upholstery nozzle stored in the

appliance

For specific cleaning requirements, two additional

parts are included with the vacuum cleaner in an

integrated accessories compartment*.

Open the compartment by pressing gently as shown

in the figure.

The nozzles may be attached to the suction tube or

the handle on the suction hose, depending on

requirements.