Operation Manual

51
ENGLISH
ON/OFF Switch on/o
Use the ON/OFF button to switch the appliance on or o.
NOTE:
• When switching on for the rst time after you have
connected the mains plug to the mains outlet, the
fan works in NOR (normal) mode with a low speed
(LO).
• After switching o and on again using the ON/OFF
button, the appliance continues working in the last
set mode.
SPEED Speed
Press the SPEED button to select one of the three dier-
ent speeds.
• LO low
• MI medium
• HI high
TIMER Timer
If you want the timer to switch the device o, press the
TIMER button.
NOTE:
Every press of the TIMER button increases the operating
time by 30 minutes.
Maximum shut-o time: 7.5 hours.
MODE Wind Change Functions
The device has the two special functions: NAT (NATURE)
and SLE (SLEEP). The speed of the fan buries between the
functions.
Press the MODE button to switch these functions on.
• NAT Natural Mode
- If the HI (high speed) setting is selected, the speed
alternates between high– medium – low – o.
- If you have selected MI (medium speed), the speed
alternates between medium – low – o.
- In the LO (low speed) setting, the speed alternates
between low - o.
• SLE Sleep Mode
- If HI speed is set: The fan works in the rst
30 minutes as in “Natural Mode” at the HI speed
setting. In the subsequent 30 minutes the fan
works as in “Natural Mode” at the set MI speed. For
the remaining time the fan works as in “Natural
Mode” at the speed setting LO.
- If MI speed is set: The fan works for the rst
30 minutes as in “Natural Mode” at the speed set-
ting MI. For the remaining time the fan works as in
“Natural Mode” at the speed setting LO.
- If LO speed is set: Switching between low speed
and shut-o of the fan as in “Natural Mode”.
• Select the NOR (NORMAL) function to return to nor-
mal operation.
OSC Oscillation
• If you select the OSC function the device oscillates
automatically through a range of approximately
60 degrees.
• In order to switch the function of, press the OSC
button again.
MOIST Mist
The humidier can be switched on and o regardless of
the fan mode.
Press the MOIST button to select the intensity of the mist:
• LO low
• MI medium
• HI high
• To deactivate the function, press the MOIST button
again.
Rell water
When you want to rell the tank:
• Switch o the appliance.
• Disconnect the plug from the mains.
• If necessary, pour the remaining water out of the tank.
• Proceed as described under “Fill with water”.
Shutting o
If you want to shut o the fan:
• Switch o the appliance.
• Disconnect the plug from the mains.
• Empty the water tank and the base of the humidier
if you do not plan to use the appliance for a lengthy
period.
Cleaning
WARNING:
• Always remove the mains plug before cleaning the
device.
• If you need to remove the
protection grid : Always
switch the device of and remove the mains plug.
• Under no circumstances should you immerse the
device in water for cleaning purposes. Otherwise this
might result in an electric shock or re.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
Housing
• Clean the outside of the device with a dry cloth with-
out any additives.
• If the device is very dirty wet a cloth with water and
then wipe the device dry once you have inished.