Operation Manual
33
UK
Warning:
If the network message service (e.g. 1571) is enabled on your line, you must set the answering machine to
answer calls after either 2 or 4 rings, otherwise the message service will take the call first.
12.12.2 Set the Maximum Recording Time for Incoming Messages
You can set the maximum length of the recording time of the incoming messages to be either 1, 2 or 3
minutes, or of unlimited length up to the available memory left on the answering machine.
tPress
and / to select “ANS. MACHINE“.
tPress
and / to select “TAM SETTINGS“.
tPress
and / to select “RECORD TIME“.
tPress
and / to select your desired recording time from the available options “60S“, “120S“,
“180S“ or “UNLIMITED“.
tPress
to confirm.
12.12.3 Turn On or Off the Base Screening
You can select to turn on or off the call screening on the base.
tPress
and / to select “ANS. MACHINE“.
tPress
and / to select “TAM SETTINGS“.
tPress
and / to select “BS SCREENING“.
tPress
and / to select “ON“ or “OFF“.
tPress
to confirm.
12.12.4 Activate Remote Access
You can check messages, or otherwise operate your TAM, by calling the TAM when you are away from
home and dialling a 4-digit remote access PIN from a tone-dialling phone, provided the Remote Access
is turned on.
tPress
and / to select ”ANS. MACHINE”.
tPress
and / to select ”TAM SETTINGS”.
tPress
and / to select ”REMOTE ACC”.
tPress
and / to select ”ON” or ”OFF” to turn on or off the remote access respectively.
tPress
to confirm.
12.12.5 Change the 4-Digit Remote Access PIN
You can change your 4-digit Remote Access PIN for added security to prevent other people from
unauthorised access of your answering machine.
tPress
and / to select ”ANS. MACHINE”.
tPress
and / to select ”TAM SETTINGS”.
tPress
and / to select ”CHANGE PIN”.
tPress
to show ”PIN ?”, and then enter the current PIN (default 0000).
tPress
to show ”NEW PIN”, then enter your new 4-digit PIN.
tPress
to show ”REPEAT”, then enter your new 4-digit PIN again.
tPress
to confirm the change.
12.12.6 Reset TAM to Default Settings
You can reset your answering machine to the default settings, without deleting any messages.
tPress
and / to select ”ANS. MACHINE”.
tPress
and / to select ”TAM SETTINGS”.
tPress
and / to select ”TAM DEFAULT.”
tPress
to show “PIN ?”, and then enter the system PIN code. (Default is 0000)
tPress
to restore the TAM settings to default.
13 GUARANTEE AND SERVICE
The phone is guaranteed for 24 months from the date of purchase shown on your sales receipt. This
guarantee does not cover any faults or defects caused by accidents, misuse, fair wear and tear, neglect,
faults on the telephone line, lightning, tampering with the equipment, or any attempt at adjustment or
repair other than through approved agents.