Installation guide

14
7.10.1 Redial a number from the redial list
• In idle mode, press
to access the redial list.
Note:
If the redial list entry shows a name, press # to view the number of this
entry.
• Press
/ to browse the redial list.
• Press
to dial to the selected redial number.
Note:
If there are no numbers in the redial list, the display shows “EMPTY ”.
7.11 Find the handset
You can locate the handset by pressing the fi nd key
on the base
station. All the handsets registered to the base will produce the paging
tone and show “PAGING“ on the screen.
You can stop the paging by pressing
, or on any handset or on
the base again.
Note:
If there is an incoming call during paging, the phone will ring with the
incoming call instead of paging.
8 PRIVATE PHONEBOOK
Each handset can store up to 20 private phonebook entries with names
and numbers. Each phonebook entry can have a maximum of 20 digits
for the phone number and 8 characters for the name. You can also select
different ringtones for your phonebook entries. (Note: the different
ringtones only play if you subscribe to caller display and the incoming
number matches the stored number.)
Phonebook entries are stored alphabetically by name.
8.1 Add a new contacts entry
• From idle model, press
to show “CONTACTS“ and then press
OK
to
enter the contacts list.
• Press
OK
to show “ADD”.
• Press
OK
and then enter the name.
• Press
OK
and then enter the number.