Installation guide

15
UK
• Press
OK
and / to select the desired ringtone for your contacts
entry.
• Press
OK
to store the contacts entry.
8.2 Search for a contacts entry
• From idle model, press
to show “CONTACTS“ and then press
OK
to
enter the contacts list.
• Enter the fi rst letter of the name using the alphanumeric keys (e.g. if it
begins with C, press the 2 key three times) and then
/ to scroll to
the entry you want.
9 CALLER DISPLAY (NETWORK DEPENDENT)
This feature is available if you have subscribed the caller line identifi cation
service with your network service provider. Your phone can store up to 10
received calls with date/time information in the call log. The number will
be shown on the screen when the phone is ringing.
If the number matches with one of the entries in your contacts list, the
caller’s name stored in the contact list will be displayed alternately with
the number and the handset will ring with the ring tone associated with
that contacts entry.
If the call is from someone who withheld their number,“WITHHELD“ will
display.
If the call is from someone whose number is unavailable, e.g. an
international call or from a private exchange, “OUT AREA“ will display.
If you‘ve got new caller display records, the handsets will display “X
CALLS“ in standby mode, where X is the number of new calls. The new
calls indication will remain until all the new call records have been viewed,
and each handset has to clear its own new calls.
9.1 View the call log
All received calls are saved in the call log with the latest call at the top of
the list. When the call log is full, the oldest call will be replaced by a new
call. Any unanswered calls which have not been viewed are marked with a
at the top of the display.
• Press
to access the call log.