Operation Manual

17
UK
Note:
The respective ringer volume will be played during your selection.
10.2.3 Reset the Base
tPress “MENU” and
/ or / to select “SETTINGS“.
tPress OK and
/ to scroll to “BASE”.
tPress OK and
/ to scroll to “RESET BASE”.
tPress OK to enter the 4-digit system PIN code.
tEnter the 4-digit system PIN code
tPress OK to confirm and the screen will display “RESET BASE TO
DEFAULT?”.
tPress ”YES” to confirm. The screen will display “PLEASE WAIT...” for a
few seconds and the handset will be reset.
10.3 Display Settings
10.3.1 Set the Colour Scheme
tPress “MENU” and
/ or / to select “DISPLAY“.
tPress OK and
/ to scroll to “COLOUR SCHEME”.
tPress OK and then
/ to scroll to your desired colour scheme .
tPress OK to confirm.
tPress OK to select the desired screensaver.
10.3.2 Set the Brightness
tPress “MENU” and
/ or / to select “DISPLAY“.
tPress OK and
/ to scroll to “BRIGHTNESS”.
tPress OK and then
/ to increase or dicrease the brightness level
tPress OK to confirm.
10.3.3 Set the LCD Backlight
tPress “MENU” and
/ or / to select “DISPLAY“.
tPress OK and
/ to scroll to “LCD BACKLIGHT”.
tPress OK and then
/ to scroll to “ON“, “DIM“ or “OFF“.
tPress OK to confirm.
Note :
The LCD backlight function is only used when handset is placed in base
for charging. When set to “OFF“ the handset display will not light up
when handset is charging on base and also info on new calls will not be
visual as the display is “OFF“