Operation Manual

8
5.3 Base station (see P3)
# Meaning
13
Page
Press to page all the registered handsets.
5.4 Text and Digit Entry
In editing mode, a cursor is displayed to indicate the current text entry
position. It is positioned at the right of the last character entered.
Writing Tips:
tOnce a character is selected, the cursor will move to the next position
after a short pause.
tYou can move the cursor within the text with the
/ keys to amend
the text entry.
tPress “CLEAR“ to delete the last character.
tPress and hold “CLEAR“ to delete the entire text string.
6 INSTALLATION
6.1 Connecting the base station (see p4)
tPlug the power supply and line cord into the base station.
tPlug the power adapter into a 110-230 Vac, 50/60Hz mains socket and
the line cord into your telephone line socket.
tRoute the power adaptor and telephone line cords throught the
corresponding slots on the back of the telephone base.
tAlways use the cables provided in the box.
Warning:
>Use only the provided adaptor, using other power supplies may cause
a hazard or damage the phone.
>Install the base unit in a position where the mains adapter plug will
reach an easily accessible mains socket to unplug in case needed.
Never try to lengthen the mains power cable.