Operation Manual
9
UK
Note:
The base unit needs mains power for normal operation, not just for
charging the handset batteries.
6.2 Installing and charging the batteries (see P2)
tPlace the 2 supplied batteries into the battery compartment with the
polarity markings as shown. Use only the NiMH rechargeable battery
type provided with the telephone.
tPosition the battery compartment cover over the batteries and slide up
to click into place.
tPut the handset on the base and charge for 24 hours before using the
handset for the first time.
>The handset will give a beep when it is properly placed on the base
or charger.
7 TELEPHONE OPERATION
7.1 Make a call
7.1.1 Preparatory dialling
tEnter the phone number and press
or to connect to the line and
dial the number.
>When entering the number, if you make a mistake, press “CLEAR“ to
delete digits.
7.1.2 Direct dialling
tPress
or to connect to the line and then enter the phone number.
7.1.3 Call from the phonebook
tPress
to access the phonebook and press / to select the desired
phonebook entry.
tPress
or to dial out the selected phonebook entry.
Note:
You can also access the phonebook by pressing “MENU“, OK.
Note:
The alphanumeric keys provide a short-cut to find entries beginning with
the corresponding letters.