Operation Manual

16
8.3 Auto answer
The phone is set to answer calls by lifting the handset off the base or charger. This
feature can be switched off so that calls can only be answered by pressing
.
1. Press
, scroll to « PERSONAL SET » and press
OK
.
2. Scroll
to « AUTO ANSWER » and press
OK
3. Press / to select « ON » or « OFF ».
4. Press
OK
to confirm or to return to the previous menu.
9. BASE SETTINGS
9.1 Eco mode
By operating the phone in Eco mode the power emissions level can be reduced.
When the Eco mode is set to ON, the base transmission power will be reduced.
This feature is set to OFF by default.
1. Press
, scroll to « ADVANCED SET » and press
OK
.
2. The display shows « ECO MODE », press
OK
3. Press / to select « ON » or « OFF ».
4. Press
OK
to confirm or to return to the previous menu.
Note: When ECO mode is set to ON, the handset range will be reduced.
9.2 Zero Emission (Eco +)
When Zero emission is activated and the unit has been idle for 1 minute the
transmitted power between the handset and the base will stop. An incoming call
or pressing any key on handset will activate the unit and it will revert back to the
normal mode. This feature is set to OFF by default.
1. Press
, scroll to « ADVANCED SET » and press
OK
.
2. Scroll
to « ZERO EMIT », press
OK
.
3. Press
/ to select « ON » or « OFF »
4. Press
OK
to confirm or to return to the previous menu.
9.3 Auto Prefix
You can set the phone to detect a dialling number and replace it with another number.
The number to be detected can be up to 5 digits long. It can be replaced with a
number up to 10 digits.
1. Press , scroll to « ADVANCED SET » and press
OK
.
2. Scroll
to « AUTO PREFIX », press
OK
.