Operation Manual

1716
UK
3. DIGIT DETECT is displayed. Press
OK
.
4. Enter the number you want to be detected and press
OK
.
5. Scroll to PREFIX and press
OK
.
6. Enter the number you want it replaced with.
7. Press
OK
to confirm or to return to standby.
9.4 Recall Time
This setting is useful to access certain network and PABX/switchboard services.
The default recall time is suitable for your country and network operator. It is unlikely
that you should need to change this setting unless advised to do so.
1. Press , scroll to « ADVANCED SET » and press
OK
.
2. Scroll
to « RECALL TIME », press
OK
.
3. Press
/ to select « SHORT », « MEDIUM » or « LONG ».
4. Press
OK
to confirm or to return to the previous menu.
9.5 Dial mode
The default dialling mode is suitable for your country and network operator. It is unlikely
that you should need to change this setting unless advised to do so.
1. Press , scroll to « ADVANCED SET » and press
OK
.
2. Scroll
to « DIAL MODE », press
OK
.
3. Press
/ to select « TONE » or « PULSE ».
4. Press
OK
to confirm or to return to the previous menu.
9.6 Change base PIN code
Some functions are protected by a 4 digit PIN code which must be entered if the
settings are changed. The default PIN is 0000. The PIN can be changed to a preferred
number.
When entering a PIN, the digits are shown as ****.
1. Press , scroll to « ADVANCED SET » and press
OK
.
2. Scroll
to « PIN CODE » and press
OK
.
3. Enter a new 4 digit PIN and press
OK
.
4. Re-enter the new PIN.
5. Press
OK
to confirm or to return to the previous menu.
IMPORTANT
If the PIN code is changed, please keep a record of the new number.