Operation Manual

1918
UK
IMPORTANT
Resetting the phone to its default settings will delete all entries in the Call
list. Current handset and base settings will also be reset. Entries stored in the
phonebook are retained.
1. Press
, scroll to « ADVANCED SET » and press
OK
2. Scroll to « RESET » and press
OK
3. The display shows « RESET ? ».
4. Press
OK
to confirm or
to return to the previous menu. The phone will
restart automatically.
9.10 Default settings
Key beep ON Calls list Empty
Auto answer OFF Redial list Empty
Ringer melody 1 PIN code 0000
Ringer volume 3 Dial mode Tone
Ear volume 2 Eco mode OFF
Phonebook Unchanged Keypad lock OFF
10. HELP
No dial tone
.
Use only the telephone line cord supplied.
.
Check that the telephone line cord is connected properly.
.
Check that the mains power is connected properly and switched on.
No display
.
Check that the batteries are inserted correctly and fully charged. Use only approved
rechargeable batteries supplied.
.
Check that the handset is switched on. Press and hold
.
.
Reset the base by removing the batteries and disconnecting the mains power. Wait
for around 15 seconds before connecting it again. Allow up to one minute for the
handset and base to synchronize.
icon flashes
.
Handset is out of range. Move closer to the base.
.
Make sure that the handset is registered to the base.
.
Check that the mains power is connected properly and switched on.