Operation Manual

2120
Keypad does not seem to work
.
Check that the keypad lock is not on.
icon is not scrolling during charge
.
Adjust the handset slightly on the base.
.
Clean the charging contacts with a cloth moistened with alcohol.
.
Check that the mains power is connected properly and switched on.
.
The battery is full. When the handset is fully charged,
icon will appear steadily
on the display.
No Caller Display
.
Check the subscription with the network operator, see.
.
The caller may have withheld their number.
.
The record cannot be found in the phonebook. Check that the correct name/number
is stored in the phonebook, with the full area code.
I have forgotten my PIN!
.
Restore the phone to its default settings.
Cannot register a handset to the base
.
Up to a maximum of 4 handsets can be registered to a base. De-register a handset
in order to register a new one, see.
.
Check that correct PIN code (default = 0000) has been entered.
.
Check that the handset and base are at least one metre away from other electrical
equipment to avoid interference when registering.
Handset does not ring
.
The handset ringer volume may be set to Off.
Noise interference on my phone or on other electrical equipment
nearby
.
Place the phone at least one metre away from electrical appliances or any metal
obstructions to avoid any risk of interference.