User guide

HELP

I cannot register my Voxtel Smart 3 to the base station

Try resetting the base station. You can do this by:

• Holding the Page button on the base station for about 9 seconds until the Talk/Message

LED blinks.

• Release the Page button and press it again immediately.

• The Talk/Message LED light should light up once more.

• Register your Voxtel Smart 3 to the base station. See page 19 on how to register your

Voxtel Smart 3 to the base station.

My email could not be delivered due to connection to the server on port 25 timed

out

• You may need to change the port setting on an outgoing mail server for one of your

email accounts.

I cannot access Internet radio broadcast

• Your Voxtel Smart 3 must join a Wi-Fi network that is connected to the Internet.

• For information about joining a Wi-Fi network, see page 36.

Interference

• Noise interference on your radio or television

• Your base station may be too close. Move it as far away as possible.

There is no dial tone

• Your Voxtel Smart 3 may not be registered to a base station.

There is no ring tone

• The ring tone is deactivated.

• Increase the volume.

Caller ID does not work

• Check your subscription with your network operator.

• If you subscribe to high-speed Internet service (Digital Subscriber Line - DSL) through

your telephone lines, you must install a DSL filter between the base and the telephone

wall jack. The filter will prevent noise and caller ID problems caused by DSL

interference. Please contact your DSL service provider for more information about DSL

filters.

A new contact cannot be stored

• The contacts list is full. Delete an entry to free memory.