Operation Manual

2928

Replacing the fuse

Unplug the power cord from the mains and disconnect the battery

clamps from the battery before replacing the blade-type fuse. The

fuse is visible on the back panel of the device. Remove the defective fuse

(fuse wire broken) and replace it with a fuse of the same amperage. To remove the

fuse, insert a screwdriver into the slot between the fuse and the fuse holder. Use the

screwdriver as a lever. You can use standard automotive fuses as spare fuses.

Replace the fuse without using excessive force!

Faulty fuses are not covered by the guarantee.