User Manual
22 23ENGLISH
EC-DECLARATION OF CONFORMITY
SYMBOLS
ENGLISH
Safety Warnings Specifi c for Sanding Operations:
a) Do not use excessively oversized sanding disc paper.
Follow manufacturers recommendations, when
selecting sanding paper.
Safety Warnings Specifi c for Wire Brushing Operations:
a) Be aware that wire bristles are thrown by the brush
even during ordinary operation. Do not overstress the
wires by applying excessive load to the brush.
b) If the use of a guard is recommended for wire
brushing, do not allow any interference of the wire
wheel or brush with the guard.
Additional Safety and Working Instructions
MAINS CONNECTION
SPECIFIED CONDITIONS OF USE
WORKING INSTRUCTIONS
STARTING CURRENT LIMITER + SMOOTH START
ELECTRONICS
MAINTENANCE
STARTUP PROTECTION