User Manual

D
Deutsch
11
GB
English
TECHNICAL DATA
Angle Grinder
WS 8-100 WS 8-115 WS 8-115 K
Rated input 800 W 800 W 800 W
Rated speed 12000 min
-1
12000 min
-1
12000 min
-1
D= Grinding disk diameter max.
d= Grinding disk hole diameter
100 mm
16 mm
115 mm
22,2 mm
115 mm
22,2 mm
b= Cutting disk thickness min. / max. 1/3 mm 1/3 mm 1/3 mm
b= Grinding disk thickness max. 6 mm 6 mm 6 mm
D= Grinding surface diameter max. 100 mm 115 mm 115 mm
D= Wiring brush diameter max. 65 mm 75 mm 75 mm
Thread of work spindle M 10 M 14 M 14
Weight according EPTA-Procedure 01/2003 1,8 kg 1,9 kg 1,9 kg
Noise information
Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A)) 86,3 dB (A) 86,3 dB (A) 86,3 dB (A)
Sound power level (Uncertainty K=3dB(A)) 97,3 dB (A) 97,3 dB (A) 97,3 dB (A)
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 60745
Surface grinding:
Vibration emission value a
h,SG
Uncertainty K=
4,2m/s
2
1,5 m/s
2
4,2m/s
2
1,5 m/s
2
4,2m/s
2
1,5 m/s
2
Disk sanding:
Vibration emission value a
h,DS
Uncertainty K=
4,2 m/s
2
1,5 m/s
2
4,2 m/s
2
1,5 m/s
2
4,2 m/s
2
1,5 m/s
2
TECHNICAL DATA
Angle Grinder
WS 8-125 WS 8-125 K
Rated input 800 W 800 W
Rated speed 12000 min
-1
12000 min
-1
D= Grinding disk diameter max.
d= Grinding disk hole diameter
125 mm
22,2 mm
125 mm
22,2 mm
b= Cutting disk thickness min. / max. 1/3 mm 1/3 mm
b= Grinding disk thickness max. 6 mm 6 mm
D= Grinding surface diameter max. 125 mm 125 mm
D= Wiring brush diameter max. 75 mm 75 mm
Thread of work spindle M 14 M 14
Weight according EPTA-Procedure 01/2003 1,9 kg 1,9kg