User manual

4
www.aeg.com
4. CONTROLS
A B C D E F G H
Button Function Led
A Turns the Lighting System on and off.
If pressed and held for 5 seconds with the hood turned
off and no alarm, do:
Enables the Activated Charcoal Filter Alarm.
Disables the Activated Charcoal Filter Alarm.
On or Off
2 Flashes Led buttom H
1 Flash Led buttom H
B Turns the Motor on and off.
Enables Keyboard Lock mode if pressed and held for
5 seconds.
It is disabled by pressing the button for 5 seconds.
On or Off
All the Leds ash twice and
during Keyboard Lock the Leds
light up in sequence.
All the Leds ash once.
C Activates speed one. On.
D Activates speed two. On.
E Activates speed three. On.
F Activates intensive speed from any other speed,
including motor off. This speed is timed to run for
5 minutes, after which the system will return to the
speed that was previously set. Suitable to deal with
se-vere cooking fumes.
It is deactivated by pressing the button or turning the
motor off.
On.
G Activates delayed automatic shutdown of the motor
and the lighting system after 15 minuts.
Suitable to complete the elimination of residual odours,
it is deactivated by press-ing the button of turning the
motor off.
If pressed and held for 5 seconds with the hood and
lightturned off and no alarm, do:
Enables the Remote control.
Disables the Remote control.
On.
2 Flashes Led buttom C + B
1 Flash Led buttom C + B
H Performs a Reset of the Filter saturation alarm when
the button is pressed for ap-proximately 2 seconds
with the hood turned off.
After 100 hours operation the
Led lights up continuously to
indicate saturation of the Metal
Grease Filters.
After 200 hours operation the
Led ashes to indicate saturation
of the Activated Charcoal Filters.
5. LIGHTING
Warning: This appliance is tted with a white LED
lamp classed as 1M according to EN 60825-1:
1994 + A1:2002 + A2:2001 standards; maximum
optical power emitted @439nm: 7µW. Do not
look directly at the light through optical devices
(binoculars, magnifying glasses…).
• For replacement contact technical support. (“To
purchase contact technical support”).