EN USER MANUAL DE BENUTZERHANDBUCH FR MANUEL D’INSTRUCTIONS
Hob²Hood It is an advanced automatic function which connects the hob to a special hood. Both the hob and the hood have an infra — red signal communicator. Speed of the fan is defined automatically on basis of mode setting and temperature of the hottest cookware on the hob. You can also operate the fan from the hob manually. When you operate the appliance with the function: • Protect the hood panel from direct sunlight. • Do not spot halogen light on the hood panel. • Do not cover the hob panel (eg.
Receiver activation Model of the hood X79263MK1 X76263MK10 X79263MK10 Button A Function Led If pressed and held for 5 seconds with the hood and lightturned off and no alarm, do: Enables the Remote control. Disables the Remote control. Display “IR” and the Dot flashing twice.
Abzugshauben mit Hob²Hood Funktion Dabei handelt es sich um eine innovative Automatikfunktion, die die Verbindung des Kochfelds mit einer Spezial-Abzugshaube ermöglicht. Kochfeld und Haube funktionieren mit einem Infrarot-Sender. Die Lüftergeschwindigkeit wird je nach Einstellung und Temperatur des Kochgeschirrs auf dem Kochfeld automatisch reguliert. Der Lüfter kann auch über das Kochfeld von Hand bedient werden.
Aktivierung des empfängers Modell der Abzugshaube X79263MK1 X76263MK10 X79263MK10 Taste A Funktion Led Mit 5 Sekunden langem Drücken bei ausgeschalteter Abzugshaube und Beleuchtung und ohne Alarm, wird: Die Fernbedienung aktiviert. Die Fernbedienung deaktiviert. Display “IR” und der Punkt blinken zwei Mal. Display “IR” und der Punkt blinken nur einmal.
Hotte Hob²Hood Il s’agit d’une fonction automatique avancée qui raccorde la plaque de cuisson à une hotte spéciale. Un dispositif de communication à signal infrarouge est installé sur la plaque et sur la hotte. La vitesse de ventilation est automatiquement définie en fonction des paramétrages et la température de la casserole la plus chaude sur la plaque de cuisson. Le ventilateur peut également être utilisé en mode manuel à partir de la plaque de cuisson.
Activation du récepteur Modèle de hotte X79263MK1 X76263MK10 X79263MK10 Bouton Fonction A Led Si appuyé pendant 5 secondes tandis que la hotte et le voyant sont éteints et en l’absence d’alarme: - active la télécommande; «IR» s’affiche et le point clignote deux fois. - désactive la télécommande. «IR» s’affiche et le point clignote une fois seulement.
991.0370.