X91384MIO UK EN COOKER HOOD USER MANUAL 3
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 3 CONTENTS 5 6 7 9 15 Important safety information Your appliance Operating instructions Maintenance and cleaning Installation instructions - electrical connections
Thank you for buying an AEG product. To enable you to use your appliance effectively and safely, please read this instruction book carefully before using the appliance and retain for future reference. If you require guidance in the use of the appliance or require further information on AEG Products, please contact our Customer Services Department. For general enquiries concerning your AEG appliance or for further information, visit our website at http:\\www.aeg.co.
IMPORTANT SAFETY INFORMATION IMPORTANT SAFETY INFORMATION These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of the meanings of these warnings contact the Customer Services Department. Installation • Any installation work must be undertaken by a qualified electrician or competent person.
YOUR APPLIANCE YOUR APPLIANCE ���� ���� ����� ����� 6
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS A B Button Function C D E F Specifications A Hood Functions On/Off When the button is touched with the hood turned off, all functions light up (intensity 50%) and are enabled. When the button is touched with the hood in operation, all functions are turned off and disabled (Motor Off + Lights Off). B Manages motor speed: 0-V1-V2-V3-V4-P When the area is touched, the motor starts at the speed required.
OPERATING INSTRUCTIONS Hood Options in Sensor mode When operating in Sensor mode, the type of hob being used has an influence. Two options are available: • Electric hob ; • Gas hob Initially it is set to electric hob.
OPERATING INSTRUCTIONS 9 OPERATING INSTRUCTIONS This cooker hood can be used to recirculate or extract contaminated air. Recirculation Mode The cooker hood is supplied specified for use in the recirculation mode with the charcoal filter fitted. The contaminated air is cleaned by passing through the filters and than back into the kitchen. ��� The activated charcoal filter absorbs odours arising from cooking. In use it will slowly become saturated in grease and less effective.
MAINTENANCE AND CLEANING MAINTENANCE AND CLEANING Before carrying out any maintenance or leaning isolate the cooker hood from the mains supply. The cooker hood must be kept clean, as a build up of grease or fat can be a fire hazard. External Cleaning The metal casing, grille and chimney should be cleaned at least once a month to keep it looking like new. Wipe over the hood with a soft cloth wrung out in mild soapy water and then dry thoroughly.
MAINTENANCE AND CLEANING MAINTENANCE AND CLEANING Alarm signal reset • Turn the Lights and the Suction Motor off. • Touch button F. The operation is confirmed when the Led goes out. Before carrying out any maintenance or cleaning isolate the cooker hood from the mains supply. Charcoal Filters In the recirculation mode the charcoal filters absorb smells and unwanted odours. This cannot be washed or regenerated, and must be changed when the led on button F starts to flash, or at least once every 4 months.
MAINTENANCE AND CLEANING MAINTENANCE AND CLEANING Changing the Lighting Warning: This appliance is fitted with a white LED lamp classed as 1M according to EN 60825-1: 1994 + A1:2002 + A2:2001 standards; maximum optical power emitted @439nm: 7µW. Do not look directly at the light through optical devices (binoculars, magnifying glasses…). • For replacement contact technical support.
SOMETHING NOT WORKING - SERVICE AND SPARE PARTS 13 SOMETHING NOT WORKING If, having followed these instructions carefully, your cooker hood fails to work properly please carry out the following checks. Solution Symptom The cooker hood will not start • Check the hood is connected to the electricity supply. • Check that the fan speed control is set to 1, 2 or 3. The cooker hood is not working effectively • The fan speed is set high enough for the task. • The grease filter is clean.
GUARANTEE CONDITIONS GUARANTEE CONDITIONS Standard Guarantee Conditions We, AEG, undertake that if within 12 months of the date of the purchase this AEG built-in appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, the company will, at our option, repair or replace the same FREE OF ANY CHARGE for labour, materials and carriage on condition that: • The appliance has been correctly installed and used only on the electrical supply stated on the rating
INSTALLATION INSTRUCTIONS - ELECTRICAL CONNECTIONS 15 INSTALLATION INSTRUCTIONS It is dangerous to alter the specifications or attempt to modify this product in any way.
INSTALLING THE COOKER HOOD INSTALLING THE COOKER HOOD Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a breakdown. All installations must comply with the local authorities requirements for the discharge of exhaust air. Incorrect installation may affect the safety of this cooker hood. Installation Requirements Before installation check the wall to which the cooker hood is to be fitted for electric cables, water pipes or gas.
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Drilling the Ceiling/shelf and fixing the frame • Use a plumb line to mark the centre of the hob on the ceiling/ support shelf. • Place the drilling template 21 provided on the ceiling/support shelf, making sure that the template is in the correct position by lining up the axes of the template with those of the hob. • Mark the centres of the holes in the template.
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Fixing The Frame • Loosen the two screws fastening the lower chimney and remove this from the lower frame. • Loosen the two screws fastening the upper chimney and remove this from the upper frame. If you wish to adjust the height of the frame, proceed as follows: • Unfasten the metric screws joining the two columns, located at the sides of the frame. • Adjust the frame to the height required, then replace all the screws removed as above.
�� INSTALLATION INSTRUCTIONS ��� INSTALLATION INSTRUCTIONS �� Connection control group • Unscrew the screws near the Air outlet and use these for attaching the Control Group 50. • Connect up all the connectors to the sockets provided on the Control Board Unit, making sure they are compatible. ��� Flue assembly - mounting the hood body • Position the upper chimney section and fix the upper part to the frame using the 2 screws 12c (2,9 x 6,5) provided.
www.aeg-electrolux.