Owner`s manual

SELECT BUTTON:

WHEN PHONE DEAD ↓

The arrow keys are used to select from a list of event buttons:

• WHEN ENERGY LO

• WHEN ENERGY MID

• WHEN ENERGY HI

• WHEN ENERGY CRIT

• WHEN PHONE DEAD

• WHEN PHONE RING

• WHEN PHONE OFFHK

• WHEN PHONE ONHOOK

• WHEN AC PWR OFF

• WHEN AC PWR ON

• WHEN BATTERY LOW

• WHEN BATTERY OK

• WHEN DCM FAIL

• WHEN DCM OK

Edit Program Command

Selecting 2 (CMD), from the Edit Program menu, allows the commanded action for the program to be specified. The following

menu is displayed:

1=CONTROL 2=SECURITY

3=BUTTON 4=ALL ↓

5=TEMP 6=ENERGY

8=MESSAGE ↑

After the command is specified, the display returns to the Edit Program menu:

Program Control Commands

Press the 1 (CONTROL) key to command lights and appliances. Specify the desired command - See Control.

Porch Light (Unit Name)

0=OFF 1=ON 2=DIM 3=BRT ↓

Porch Light (Unit Name)

4=LVL 5=RMP 9=TIM #=STA↑

If the selected unit is part of a House Code that is configured to use the Compose Format, the second page of the menu is

modified to allow Scene commands. Consequentially, the Level and Ramp Commands are removed from the menu.

Entry Lights (Unit Name)

4=SCN 9=TIM #=STA↑

If the selected unit is not capable of dim and bright commands, only a single menu is shown.

SPRINKLER 1 (Unit Name)

0=OFF 1=ON 9=TIM #=STA

Program Security Commands

Press the 2 (SECURITY) key to arm and disarm the security system, or to bypass and restore an individual zone. The following

menu is displayed: