Owner`s manual

ZONE NAME

4 ATLANTIC

5 EASTERN

6 CENTRAL

7 MOUNTAIN

8 PACIFIC

9 YUKON

10 ALASKA-HAWAII

11 BERING

The value specified for longitude may be adjusted to correct for areas, such as Nova Scotia, where the local time differs from

Greenwich Mean Time by a non-hourly amount. The calculated time of sunrise/sunset will change by four minutes for every

degree change in longitude. To cause the calculated sunrise/sunset to occur later, enter a larger value for longitude. Enter a

smaller value for longitude to cause the time to occur earlier.

It is not necessary to alter the time zone to compensate for daylight savings time, Aegis 1000 will automatically adjust its

calculations for sunrise and sunset, and time when daylight savings time begins and ends.

LATITUDE: 30

0-60 ×

LATITUDE N/S: 1

1=NORTH 2=SOUTH ×

LONGITUDE: 90

0-180 ×

LONGITUDE E/W: 2

1=EAST 2=WEST ×

TIME ZONE: 6

0-12 ↑

Daylight Savings

Aegis 1000 automatically calculates the day of daylight savings time each year. It also adjusts the "time of day" each time

daylight savings time begins and ends.

To enable the system to properly calculate daylight savings time, a start month, start weekend, end month, and end weekend is

set-up at the factory. You may change or disable this function if desired.

DST START MONTH: 4

1-12 0=DISABLE ×

DST START WEEKEND:

FIRST SUNDAY #=CHNG ×

DST END MONTH: 10

1-12 0=DISABLE ×

DST END WEEKEND:

LAST SUNDAY #=CHNG ↑

Set the value for DST Start and End Months to "0" if Daylight Savings Time does not apply to your region, or to disable this

automatic time update feature.

The DST Start and End Weekend takes place on the specified Sunday (1-7) at 2:00 AM.