User's Manual

Status LED ON
System Back
to
Normal operation
Read Master Card
1 TIME
FEATURE SETTING PROCEDURES SUMMARY CHART -- CONTINUE
V) CREATE / DELETE SUPER USER CARDS
Read Master Card
5 TIMES
Status LED
ON ► Flashing
Auto-Confirm
Feature Group 4 Selected
LED 5 -ON
LED 1 & 2
Flashing
Auto - Confirm
Option 2 - Delete
Auto - Confirm
Option 1 - Create
LED 2 - ON
All 5 LEDs
Flashing
LED 1 - ON
All 5 LEDs
Flashing
Select Location 1-5
Read A New
Super User Card
Select Location 1-5
Execution with Bell Button
Auto - Confirm
Location
LED ON
Audible Indications: 1 Beep - Selection; Audible Indications: 2 Beeps - Confirm / Successful Audible Indications: 1 Long Beep - Duplicated Card Audible Indications: 5 Beeps - Fail
NOTE: Auto - Confirm: The system confirms the feature / function antomatically 2 .........................seconds after selection.
19
6
1 - 2 : 12VDC (Power Input Terminal)
Connect (+), terminal 1 to a 12V DC power supply. The (-), terminal 2 is the common grounding
point of the system. Make sure the power supply can provide enough power for the electric lock and
the reader.
3 : (+) 12V Power Supply for The Lock
A (+) supply point for the electric lock, which is common to terminal 1.
4 : (–) Power Supply for The Lock (Output Contact for Door Lock Strike)
A 3 Amp rating solid state switch output contact for electric door lock strike, it switches to (-) in
operation. It is selectable for operating Fail-safe or Fail-secure electric lock via jumper setting.
Connect the negative side (-) of the electric lock to this terminal and the positive side (+) to terminal
3. The operating time of the contact is programmable. Please see “Set Output Mode for Door
Lock” for the details.
Important
Two types of electric locks are available on the market. It is necessary to confirm that the lock is
Fail-safe or Fail-secure in order to make the correct jumper selection. Wrong selection may cause
damage to the lock or the reader.
● Fail-safe Electric Lock – Normally energized; power ON to lock, power OFF to unlock
● Fail-secure Electric Lock – Normally de-energized; power ON to unlock, power OFF to lock
10987654321
EG
IN
DATA
I/O
DOOR BELL
N.O.
TAMPER
N.C.
( + ) ( – )
DOOR LOCK
( + ) ( – )
12VDC
THE CONNECTION TERMINALS
Door Lock Selection Jumper
DOOR LOCK
2. SECURE (For Fail-secure Electric Lock)
1. SAFE (For Fail-safe Electric Lock)