User's Manual

ManualsBrandsAEI Protect-On Systems ManualsElectronicsSelf-Contained Access Control Reader

PROGRAMMING

1) Criteria for Setting System to Programming Mode

D ● The system is in standby under Normally Operation

D ● A Master card is already in possession

2) Use The Master Card to Set System into Programming Mode for The 5 Feature Groups.

● Feature Group 1 -- Record User Cards (Read Master Card 1 Time)

● Feature Group 2 -- Delete User Cards (Read Master Card 2 Times)

● Feature Group 3 -- Set Output Mode for Door Lock (Read Master Card 3 Times)

● Feature Group 4 -- Set System Safety Lock-up (Read Master Card 4 Times)

● Feature Group 5 -- Create / Delete Super User Cards (Read Master Card 5Times)

3) The Reading Manner for Master Card.

● Set system to Programming Mode with reading of Master Card 1 to 5 times for the 5 .feature

.....

.groups. Each reading must be within 2 seconds.

● Read Master Card 1 time to close Programming Mode.

.....

.Note:

.....

.The reader will stay in Programming Mode until it is closed with Master Card.

4) Audible Indications in Programming & Operation

● 1 Beep – Step jumping in feature selection

● 2 Beeps – Execution successful

● 5 Beeps – Execution failed

● 1 Long Beeps – Rejection to a repeated card in programming mode

2) Press BELL button to select Option 2 -- Delete

....Response : LED 2 is ON. After 2 seconds, the system confirms the selection with 2 beeps and

.........................then the 5 LEDs flashing.

3) Press BELL button to select the storage location 1-5 for card deletion.

....Response : The selected LED is ON. After 2 seconds, the system confirms the selection with 2

.........................beeps.

4) Press BELL button again to execute card deletion.

....Response : 2 Beeps confirm clearing done.

....Note: Repeat procedure (3) & (4) for other Super User Card(s) deletion if required.

5) Read Master Card 1 Time to exit Programming Mode.

....Response : 2 Beeps confirm reader back to normal operation.

Exit

Programming Mode

Card Deletion

Execution

Select

Location 1-5

Select

Option 2 -- Delete

Read Master Card 5 Times

Set System in Feature Group 5

5321

B) Delete Super User Card(s) – Option 2

In case a Super Card is lost, it can be deleted from the system.