User's Manual

7 : Data I/O Port

A bi-directional data communication port prepared for the connection of auxiliary keypad-readers

and split-decoder to expand the functions and features of the access control system.

8 : EG IN ( Egress Input)

A Normally Open (N.O.) input terminal referring to (-) ground. With the help of connecting a

normally open button to activate Output 1 for door opening like using Codes/Cards.

Egress button is usually put inside the house near the door. More than one egress buttons can be

connected in parallel to this terminal. Leave this terminal open if not used.

See Programming Locations 90 and 91 for more information about the Egress Button with

programmable features.

9 - 10 - 11 : OUTPUT 2 (Output Relay 2)

1 Amp relay dry contact controlled by the Group 2 User

Codes or Cards for Output 2 in the version

“A” keypad, it is an auxiliary output contact for controlling security system or automatic operator.

Terminal 9 is Normally Closed (N.C.), terminal 11 is Normally Open (N.O.) and terminal 10 is the

common point of the two contacts. It is programmable for Start/Stop (toggle) mode or Momentary

with timing. See programming Location 52 for the details.

9 : OUTPUT 2 (Open Collector Output)

An NPN transistor open collector output is for the version “B” keypad, which is controlled by the

Group 2 User Codes/Cards. It has the maximum power rating of 24VDC/100mA sink. It is equivalent

to an N.O. (Normally Open) terminal referring to ground. It can be used to drive small power device,

such as a relay or a low power control point of other equipment. This output point is programmable

for Start/Stop (toggle) or Momentary with timing. See programming Location 52 for the details.

10 - 11 : DOOR BELL (Relay Contact for Door Bell)

Door Bell output is for version “B” only. It is a Normally Open (N.O.) relay dry contact with maximum

rating of 24VDC/1Amp. It is a triggering contact of a low voltage door chime. The contact point

keeps close as long as the bell button on the keypad is pressed.

Door Lock Selection Jumper

DOOR LOCK

2. SECURE (For Fail-secure Electric Lock)

1. SAFE (For Fail-safe Electric Lock)