Installation Manual

3
1. Preparing Vehicle
a. Make sure vehicle is parked on level surface.
b. Set parking brake.
c. If engine has run in the past two hours, let it cool down.
d. Disconnect negative battery terminal.
e. Do not discard stock components after removal of the factory system.
2. Removal of stock system
Read and understand these instructions BEFORE attempting to install this product.
Failure to follow installation instructions and not using the provided hardware may
damage the intake tube, throttle body and engine.
a. Remove the two plastic clips and the factory
fresh air inlet duct.
b. Loosen the nut securing the factory air box
mounting bracket, but DO NOT remove the nut.
c. Remove the two nuts securing the factory air
box. Save these nuts for later use.
d. Remove the bolt securing the bottom of the
factory air box.
The AEM
®
intake system is a performance product that can be used safely during mild weather
conditions. During harsh and inclement weather conditions, you must return your vehicle to
stock OEM air box and intake tract conguration. Failure to follow these instructions will void
your warranty.