Manual

Page 148 of 279 EMS-4 Install and Tuning Guide_Rev 1.6
Crank Fuel & Engine Start
Typical Start Setup Tab
Crank setup options
Crank Advance – Desired ignition timing during cranking conditions
Crank Inject All – When selected, all injector outputs will fire at the same time and inject fuel
using the pulsewidth values defined in the Initial Crank Pulse table.
Crank Min RPM – The minimum engine speed before fuel and spark events are allowed.
Typically set to 50 RPM.
Crank Max RPM – The maximum engine speed for cranking fuel and spark values. Varies but
usually set to 300 – 500 RPM.