Installation Manual

4
3. Installation of AEM
®
intake system.
a. When installing the intake system, do not completely tighten the hose clamps or mounting hardware until
instructed to do so.
e. Release latch and remove the air filter element
and housing.
Release latch and
remove assembly.
f. Loosen and remove the 4 bolts retaining the MAF
sensor. Remove the MAF sensor. The screen will
not be reused.
Loosen and remove the bolt on
each corner of the MAF sensor.
b. Attach reducer coupler and hose clamps. Do not
completely tighten.
c. Insert inlet pipe into coupler. Do not completely
tighten hose clamp.