Installation Manual

e. Attach provided 3/4” breather hose for the PCV

and secure with provided hose clamps.

d. Attach the provided 5/8” hose for the IAC and

secure with provided hose clamps.

Attach and secure

with hose clamps

f. Assemble Air horn/MAF sensor adapter to bracket

and MAF sensor as shown. Install the provided

gasket between the MAF sensor and AEM air horn.

The bracket will be on the opposite side of the MAF

sensor wiring harness plug. The bracket should

point in the same direction as the airflow arrow

marked on the MAF sensor. Tighten bolts to 55 in-

lb.

g. Attach coupler and hose clamps. Do not

completely tighten.

Attach

coupler and

hose clamps.