Installation Manual

Stop here if you do not have an external IAT sensor. Attach the air filter and push-in the

air filter onto the adapter and secure. Proceed to step 4 to complete your installation.

For vehicles that have an external IAT sensor proceed to step 3k to continue installation.

h. Loosen bolt but do not remove.

NOTE: On models without individual coils

loosen and remove bolt.

Bolt location on

other models.

Loosen.

i. Attach bracket as shown with provided bolt. The

slot on the bracket should be between the washer

and the stock bracket.

Insert bolt

j. Attach the coupler to the inlet pipe. Plug in the

MAF sensor harness.

Attach here.