Supported Applications - Mitsubishi 1995-1999 4G63 Engine User Manual

18
© 2014 AEM Performance Electronics
Infinity
Pin
Hardware
Reference
7100-XXXX-62
7101-XXXX-63
Function
Dest.
Pin
2G
DSM
Hardware Specification
Notes
C2-52
Coil 8
Coil 8
25 mA max source current
0–5V Falling edge f ire. DO NOT connect
directly to coil primary . Must use an ignitor
OR CDI that accepts a FALLING edge f ire
signal.
C2-53
Coil 9
Coil 9
25 mA max source current
0–5V Falling edge f ire. DO NOT connect
directly to coil primary . Must use an ignitor
OR CDI that accepts a FALLING edge f ire
signal.
C2-54
Coil 10
Coil 10
25 mA max source current
0–5V Falling edge f ire. DO NOT connect
directly to coil primary . Must use an ignitor
OR CDI that accepts a FALLING edge f ire
signal.
C2-55
Highside Fuel
Pump switch
Fuel Pump
Highside switch, 0.7A max, Solid
State Relay , NO internal f ly back
diode.
+12V High Side Driv e. Will prime f or 2
seconds at key on and activ ate if RPM > 0.
C2-56
Not used
Not used
Not used
Not used
2G DSM Pin Numbering
1995–1999 Mitsubishi Eclipse GST, Eclipse GSX, Talon TSI ECU Connectors Viewed from Wire Side
Infinity Pin Numbering
AEM Infinity Connectors Viewed from Wire Side