Specifications

PA250 Series High Power Voice Amplifier
SM44-1 Installation and Operation Manual
April 22, 2012 Rev: 2.00 Page 2-6
ENG-FORM: 805-0100.DOTX
CONFIDENTIAL AND PROPRIETARY TO ANODYNE ELECTRONICS MANUFACTURING CORP.
2.6 Accessories Required But Not Supplied
Installation kits are required to complete the installation. They consist of the following:
2.6.1 Power/Speaker Kit
This kit is used for the Power/Speaker connection. For a straight connection use PAPWR-IKS and for a
right angle connection use PAPWR-IKSR.
PAPWR-IKS consists of
Quantity Description AEM Part No.
1 MS 5 Pin Female Straight Sealed Solder Cup 20-42-001
PAPWR-IKSR consists of
Quantity Description AEM Part No.
1 MS 5 Pin Female 90q Sealed Solder Cup 20-39-005
2.6.2 Recorder Input Kit
This kit is used for the Recorder input connection. For a straight connection use PAREC-IKS and for a
right angle connection use PAREC-IKSR.
PAREC-IKS consists of
Quantity Description AEM Part No.
1 MS 3 Pin Female Straight Sealed Solder Cup 20-42-003
1 Nut, Shaft Locking ¼" 25-01-002
PAREC-IKSR consists of
Quantity Description AEM Part No.
1 MS 3 Pin Female 90q Sealed Solder Cup 20-39-003
1 Nut, Shaft Locking ¼" 25-01-002
2.6.3 Microphone Input Kit
This kit is used for the Microphone input connection. For a straight connection use PAMIC-IKS and for a
right angle connection use PAMIC-IKSR.
PAMIC-IKS consists of
Quantity Description AEM Part No.
1 MS 3 Pin Female Straight Sealed Solder Cup 20-42-003
1 Nut, Shaft Locking ¼" 25-01-002