Specifications

PA250 Series High Power Voice Amplifier
SM44-1 Installation and Operation Manual
Installation and Operation Manual Page iv
ENG-FORM: 820-0100.DOTX
CONFIDENTIAL AND PROPRIETARY TO ANODYNE ELECTRONICS MANUFACTURING CORP.
Table of Contents
Section Title Page
1.0 Description
1.1 Introduction 1-1
1.2 Product Description 1-1
1.3 Design Features 1-1
1.4 Specifications 1-2
1.4.1 Electrical Specifications 1-2
1.4.2 Physical Specifications 1-2
1.4.3 Environmental Specifications 1-3
1.5 Auxiliary Components 1-3
1.5.1 Control Panel 1-3
1.5.2 Microphone 1-3
1.5.3 Loudspeakers 1-4
1.5.4 Power Supplies 1-5
2.0 Installation
2.1 Introduction 2-1
2.2 Unpacking and Inspection 2-1
2.2.1 Warranty 2-1
2.3 Continued Airworthiness 2-1
2.4 Installation Procedures 2-2
2.4.1 Cautions 2-2
2.4.2 Cabling and Wiring 2-2
2.4.3 Ground Site Selection 2-3
2.4.4 Aiborne Installation 2-3
2.4.5 Remote Installation 2-3
2.4.6 Post Installation Checks 2-4
2.5 Accessories 2-5
2.5.1 Dummy Load 2-5
2.5.2 Meter Test Set 2-5
2.5.3 Protective Circuit Test Unit 2-5
2.5.4 Paralleling Transformers 2-5
2.5.5 Remote Controls 2-5
2.5.6 Tape Recorders/Players 2-5
2.6 Accessories Required But Not Supplied 2-6
2.6.1 Power/Speaker Kit 2-6
2.6.2 Recorder Input Kit 2-6
2.6.3 Microphone Input Kit 2-6
2.6.4 Remote Input Kit 2-7
2.7 Installation Drawings 2-7