User Guide

32 Clamp-on Ground Resistance Tester Model 6416
6.3.1.1 Data Displayed in Standard Mode
The last measurement is displayed. The MR
symbol and the sequence number of the
record being recalled are also displayed.
Figure 6-11 illustrates an impedance plus a
current measurement (Ω+A setting).
 
The stored values are displayed as they were
when recorded: same display range, alarm
states, NOISE signal, battery condition, etc.
However, the audible alarms are not
reproduced; only the symbol and the alarm
threshold blink.
Figure 6-12 illustrates a current measurement
(A setting).
 
Press ► to display the measurement storage
date/time screen.
To exit from the MR mode, set the rotary
switch to the desired mode.
 