User's Manual

View the expanded manual:
http://aeotec.com/support
Aeotec by Aeon Labs Doorbell.
Your Aeon Labs Doorbell supports playing MP3 music les with a press of this Doorbell. It has a
16MB ash memory that can store up to 100 ringtones. The volume can be adjusted manually via
short press on the Volume Button, also you can switch the Doorbell sound to the next via long press
on the Volume Button. You may change/update your Doorbell ringtone at any point in time you want
by connecting your Doorbell to your PC to update the sound track on your Doorbell’s ash memory.
Your Doorbell is a Z-Wave wireless control product. There is a small Wireless Button, which can
trigger the Doorbell on the other side of the wall to play the selected Doorbell music when pressed.
This Wireless Button has waterproof housing so it can be used in many weather conditions. The
distance of wireless control is about 100 metres outdoors, and has a 2 year battery life that allows at
least 10 Doorbell presses every day.
After the Doorbell is paired into your Z-wave network, you can use your controller/gateway/phone
application to control its ringing, or congure its advanced functions.
®
Getting your Doorbell up and running is as simple as plugging it into a wall socket and linking it to your
existing Z-Wave network. The following instructions tell you how to link your Doorbell to your Z-Wave
network using an Aeotec by Aeon Labs’ Z-Stick or Minimote controller. If you are using other products
as your main Z-Wave controller, such as a Z-Wave gateway, please refer to their respective manual
that tells you how add new devices to your network.
Your Doorbell can be removed from your Z-Wave network at any time. You’ll need to use your Z-Wave
network’s main controller (or any other primary controller) to do this, the following instructions tell you
how by using an Aeotec by Aeon Labs’ Z-Stick or Minimote controller. If you are using other products
as your main Z-Wave controller, please refer to the part of their respective manuals that tells you how
remove devices from your network.
If you’re using a Z-Stick
• Action Button
• 80dB Speaker System
• Volume Button
• Network LED
• Red LED
• Wireless Button
• USB connection port
Familiarize yourself with your Doorbell.
Quick start.
1. Decide where you want your Doorbell to be placed and plug it into a wall outlet. Its Network LED will
begin to blink.
2. If your Z-Stick is plugged into a gateway or a computer, unplug it.
3. Take your Z-Stick to your Doorbell.
4. Press the Action Button on your Z-Stick. The LED on your Z-Stick should begin to blink slowly.
5. Press the Action Button on your Doorbell.
6. If your Doorbell has been successfully linked to your Z-Wave network, its Network LED will no
longer blink. If the linking was unsuccessful and the Network LED continues to blink, repeat the steps
above.
7. Press the Action Button on the Z-Stick to take it out of inclusion mode.
1. If your Z-Stick is plugged into a gateway or a computer, unplug it.
2. Take your Z-Stick to your Doorbell.
3. Press and hold the Action Button on your Z-Stick for 2 seconds then let go. The LED should begin to
blink rapidly on your Z-Stick.
4. Press the Action Button on your Doorbell.
5. If your Doorbell has been successfully removed from your network, its Network LED will start to
blink. If the removal was unsuccessful, the Network LED will not blink.
6. Press the Action Button on the Z-Stick to take it out of removal mode.
If you’re using a Minimote:
1. Decide on where you want your Doorbell to be placed and plug it into a wall socket. Its Network LED
will begin to blink.
2. Take your Minimote to your Doorbell.
3. Press the Include button on your Minimote.
4. Press the Action Button on your Doorbell.
5. If your Doorbell has been successfully linked to your Z-Wave network, its Network LED will no longer
blink. If the linking was unsuccessful and the Network LED continues to blink, repeat the above steps.
6. Press any button on your Minimote to take it out of inclusion mode.
If you’re using a Minimote:
Removing your Doorbell from a Z-Wave network.
Installation for the Wireless Button.
Add/include/link your Doorbell to a Z-Wave network.
1. Open the Battery cover and put the CR2450 battery into Wireless Button.
2. Lock the Battery cover.
4. Lock your Wireless Button on the mount plate.
5. Your installation is complete.
3. Afx the mount plate to the wall.
You can afx the mounting plate using two 20mm screws or double-sided tape.
DOORBELL
GEN5
With your Doorbell now working as a part of your smart home, you’ll be able to congure it from your
home control software. Please refer to your software’s user guide for precise instructions on conguring
your Doorbell to your needs.
Put the battery in
CR2450 Battery
Battery cover
Lock
Unlock
Lock
You’re able to adjust your Doorbell’s ringtone volume manually by using the “Volume -“ or “Volume +”
buttons. You can reduce its volume via short press on the “Volume -” button or increase the volume via
short press on the “Volume +” button, at the same time the default doorbell music will be triggered to allow
you to hear the volume change. If you want to change to the next ringtone, press and hold the Volume
button, which will switch the current ringtone to the next one.
Installation direction
should face upward
Double-sided tape
Installation direction
should face upward
Or
If you’re using a Z-Stick: