AEOTEC Engineering Specification Range Extender 7 1
AEOTEC Engineering Specification Engineering Specification Range Extender 7 Document No. SPEC-ZW189 Version 1 Description This document mainly introduces the new generation AEOTEC Range extender. The content mainly includes its interfaces, accessories, features, specifications, quick start, and software function definition. Range extender 7 is based on Z-Wave. Can extender the communication range of z -wave network Support SmartStart, which makes inclusion more convenient.
AEOTEC Engineering Specification REVISION RECORD Version Date Brief description of changes 1 2019.06.11 First revision. 2 2019.07.
AEOTEC Engineering Specification Table of Content 1 INTERFACES & ACCESSORIES .......................................................................................................................................... 5 2 FEATURES & SPECIFICATIONS ......................................................................................................................................... 7 3 2.1 Structural Characteristics ......................................................................................
AEOTEC Engineering Specification 1 INTERFACES & ACCESSORIES QR code Pin code This circle glows QR code Pin code This circle glows QR code Pin code This circle glows QR code Pin code This circle glows 5
AEOTEC Engineering Specification Terminology Description Action Button Used for networking and resetting. Indicator Light Used for indicating the current state of the product. Plug Used for AC power input, models vary from different contries. Attenna Used for Wireless communication. QR Code Used for Z-Wave SmartStart Inclusion.
AEOTEC Engineering Specification 2 FEATURES & SPECIFICATIONS 2.1 Structural Characteristics Parameter Value Product Identifier ZW189-A01/B21/C15/C07 Dimensions US: 53.2×46×40mm EU: 46×46×60.65mm AU: 46×46×48.6mm UK: 53.2×46×48.6mm Weight US: 33.9g EU: 38.8g AU: 34.9g UK: 38.9g Color White Shell Surface Treatment Frosted(upper shell), Bright fine lines(lower shell) Shell Fire-proof Level UL94 V-0 Waterproof and Dustproof Rated IP20 under IEC 60529 Usage For indoor use.
AEOTEC Engineering Specification Z-Wave Role Type Always On Slave Security Class Non-Security, S2 Unauthenticated, and S2 Authenticated Smart Start Compatible Support Over The Air (OTA) Support Multi Channel Device No Association Support Factory Reset Support Power-down Memory Support 8
AEOTEC Engineering Specification 3 PRODUCT QUICK START 3.1 Important safety information Please read this Engineering Specification carefully for correct and effective use. Failure to follow the recommendations set forth by AEOTEC Limited may be dangerous or cause a violation of the law. The manufacturer, importer, distributor, and/or reseller will not be held responsible for any loss or damage resulting from not following any instruction in this guide or in other materials. 3.
AEOTEC Engineering Specification 2. Make sure the product is powered. If not, plug it into a wall socket and power on. 3. Click Action Button once. 4. If Removing fails, it will turn back to constantly white light; repeat steps 1 to 3. Contact us for further support if needed. 5. If Removing succeeds, it will become breathing white light. Now, it is removed from Z-Wave network successfully. 3.
