User`s manual

BC 2000 DIGITAL

Audio Routing, Mixing and Processing System for Program Production Centres

ARENA DM CONTROL SURFACE

FUNCTIONAL DESCRIPTION

When “Select” (12) is pressed in any channel, the following screen is displayed:

The path menu that can be found through the “Select” key (12) is as follow:

Equalizer

Filters

Processing

Delay

Compressor

Reverb

Noise Gate

Tone

Test signal generation

Pink noise

White noise

Input / Output Setup

3.2.1.3. Processing.

In the “Processing” option the signal can be processed in time, level or frequency. The

available effects in the “Process Menu” are:

• Equalizer. It consists of 4 equalization parametric bands, with frequency control,

gain and Q in each one.

• Filters. It can be set up as high and low pass filters, and combining both as a band

pass filter.

• Reverb. There are 4 reverb effects: Plate, Vocal, Hall and Room. It is possible to

adjust, for each, the level, high frequency damping and decay time Equalizer.

• Delay. Allows you to apply brief delays whose primary purpose is to make a

temporary adjustment among several signals. There are two delay ranges (Short

and Long) that enable adjustments of up to three seconds to be made. Although this

effect enables a variable mixing adjustment between the original signal and the

delayed signal, it is developed for use with the signal 100% delayed. Intermediate

situations generate a typical comb type filter effect. The adjustment of the “Regen”

parameter to 100% naturally produces signal feedback. This parameter must be

adjusted to 0% for use in synchronizing signals.