User`s manual

BC 2000 DIGITAL
Audio Routing, Mixing and Processing System for Program Production Centres
.
ARENA DM CONTROL SURFACE
FUNCTIONAL DESCRIPTION
39
3.2.4. “Change User“ display. Change current user.
From this screen it is possible to change the current user to a new user from a list
The procedure to change the user is as follows:
1. The user will be chosen by scrolling up or down the user list. The desired new user will be
highlighted.
2. When pressing the encoder (“SELECT NEW”), the new user will appear next to “New
Selected” label.
3. To load the selected user, the “LOAD SELECTN” button must be pressed.
4. Then, a confirmation screen appears. By choosing “YES”, the new user loading is accepted.
The operation is cancelled by pressing the “CANCEL” label.
5. If the new user configuration is loaded up, a new screen appears asking for the user’s
password. The password must be a combination of up to 10 digits from 1 to 8. These digits
are located in the first 8 keys on the upper row of the programmable keys corresponding,
from left to right, to numbers 1 to 8 (26). To confirm the password the “OK” button must be
pressed. When the password is accepted, the user change takes place.
If the user has not been assigned a password, only steps 1 through 4 will be executed.