User`s manual

BC 2000 DIGITAL
Audio Routing, Mixing and Processing System for Program Production Centres
.
ARENA DM CONTROL SURFACE
FUNCTIONAL DESCRIPTION
41
3.2.6. “System Setup“ display. System adjustments.
From the “System Setup“ screen several adjustments can be made and system information can
be checked:
 Mixer address: Change of control surface IP address.
 Frame address: Change of mixer frame IP address.
 Dsp % Cpu Used: Check the percentage of DSP use.
 Disconnect all audio process: Complete deactivation of all effects.
 Dsp Output List: Check DSP outputs assignation list.
 Firmware version information: Information about installed firmware versions.
 Date: Date change.
 Time: Time change.
 Signal Processing Changes: Information about changes per channel and approval or
not of those changes.
Access to the “System Setup“ screen is possible by pressing the P5 pushbutton, placed on the
right of the main screen. Firstly, a screen will appear to warn the user that he/she is entering a
restricted area, where changing parameters could affect the proper function of the system. After
confirming access, a password will be requested, if this has been defined from the configuration
software (“Console Password“). If the password is properly entered, the main “System Setup“
screen will appear and the different options will be listed:
Turn the lower encoder (21) placed on the right of the display (“SCROLL“) to highlight the
parameter that you want to change. Press the encoder (“ENTER“) in order to select that option.