User`s manual

BC 2000 DIGITAL
Audio Routing, Mixing and Processing System for Program Production Centres
.
ARENA DM CONTROL SURFACE
FUNCTIONAL DESCRIPTION
44
3.2.6.4. DSP% CPU Used.
This screen displays the type of function performed and percentage of CPU used by
each installed DSP board. Each DSP board performs a certain function, which may be
signal routing (MATRIX), VU meter calculation (VUMETER), effects applied to audio
signals (PROCESS) or backup. Next to the position occupied by each board in the
frame, the screen indicates the function assigned to it and the percentage of resources
it uses.
3.2.6.5. Disconnect all audio process.
This function executes a general deactivation of all the audio effects applied in the
system, that is, it switches from ON to OFF all those effects that are activated. In no
case does it modify the values of each setting applied to the various presets of each
effect in each signal.
Selecting this option brings up a warning message indicating that there are only two
options: “OK“ or “Cancel“. If you select “OK“, all the effects that are active at that time
are directly deactivated.
3.2.6.6. DSP Output list.
For each DSP board, a list is shown of the set of outputs that the board is processing.
To display the different boards that execute routings and the outputs processed by
each, simply rotate the encoder associated with the DSP Scroll function.