User`s manual

BC 2000 DIGITAL

Audio Routing, Mixing and Processing System for Program Production Centres

ARENA DM CONTROL SURFACE

FUNCTIONAL DESCRIPTION

4. INSTALLATION AND CABLING.

4.1. Description of back panel and connection for ARENA DM.

• 1.- Power switch.

• 2.- Power supply connector and fuse. The equipment may be operated with alternating

voltage of between 90V and 250V at 50 or 60 Hz; this type of power is considered

“universal,” as it will allow the equipment to be used in any country in the world with no

need for a voltage selector switch. Inside the power connector compartment, there are

two 1.6 Amp. Slow Blow fuses, one of them used as a spare.

• 3.- Ethernet LAN: Connector linking data with the controller: a standard Ethernet cable

can be connected when connecting through a switch, or the crossed network cable that

is supplied (labeled “Only direct to controller”) can be used when a direct connection is

made.

• 4.- RJ 45 digital audio conector: Connects the digitalized output from the mic input and

the inputs for VU meter 1, CUE and the control headphones. Cable is furnished to

connect to “BC 2000 CAB W” connection module (1 RJ45 connector to 4 Wago

connectors). Pin layout, from right to left, with the tongue facing up:

1.- AES VU1 In + : AES/EBU audio input for VU meter 1

2.- AES VU1 In - : AES/EBU audio input for VU meter 1

3.- AES CUE In + : AES/EBU audio input for CUE

4.- AES Headph In +: AES/EBU audio input for the control headphones

5.- AES Headph In - : AES/EBU audio input for the control headphones

6.- AES CUE In - : AES/EBU audio input for CUE

7.- AES MIC Out + : AES/EBU audio output from the ARENA DM microphone

8.- AES MIC Out - : AES/EBU audio output from the ARENA DM microphone

• 5.- AES/EBU digital audio connector by XLR, to receive the input from VU meter 2.

1.- GROUND

2.- AES VU2 In +: AES/EBU audio input for VU meter 2

3.- AES VU2 In -: AES/EBU audio input for VU meter 2

1 2

5 6