User`s manual

AEQ BC-2500

Radio Broadcast Mixing Desk

5.8. BC-2523 EXTERNAL POWER SUPPLY MODULE.

5.8.1. Functional description.

The external power supply module BC-2523 supplies the power required by the console

functions and the signaling circuits (on air/off air).

The following are situated on the module rear panel:

The ON/OFF switch POWER (1), the power cable connector and fuseholder AC POWER (2), the

signalling fuseholder FUSE (3), the voltage selector VOLTAGE SELECTOR (4) and the power

output connector DC POWER SUPPLY OUTPUT (5).

Note: The console is connected by a multi-strand cable with the relevant connectors and cross

section for this specific purpose. This cable must not be modified or changed. However if a longer

cable is required, contact the AEQ S.A. Technical Department. Maximum length is 2,5 meters.

5.8.2. Description of Controls and Connectors.

REAR PANEL

1.- Power supply switch POWER/ON

2.- AC power connector and fuseholder AC POWER

3.- Signalling Fuseholder FUSE

4.- Voltage selector VOLTAGE SELECTOR

5.- Console power supply output connector DC POWER SUPPLY OUTPUT

220v AC power fuse = 1.6A Slow (T)

110v AC power fuse = 2.5A Slow (T)

24V DC Signalling fuse = 1A

1 2 3 4 5

POWER

AC POWER

FUSE

VOLTAGE

SELECTOR

DC POWER

SUPPLY OUTPUT